DropOS

MKS CANable V2.0 S CZN analyzer with protective shell USB to CAN adapter with 0.5M cable The difference between MKS CANable 2.0Pro (isolated version) and MKS CANable 2.0 (non-isolated version): The Ali version isolates the power supply, GND and communication signals, and has stronger anti-interference ability and can effectively protect the equipment. More suitable for industrial debugging or motor field applications. product description: MKS CANable V2.0 module is an upgraded version of MKS CANable V1.0. CANable 2.0 is a small, low-cost, open source USB to CAN analyzer. CANable enumeration for the virtual serial port on your computer port and acts as a serial line for the CAN bus interface. CANable enumeration is local on Linux when using candleLight firmware CAN interface. CANable2.0 supports standards CAN2.0A, CAN2.0B and CAN FD. The MKS CANable V2.0 Pro module is an upgraded version of the MKS CANable V2.0 module. It has high-speed transmission rate and high operation stability. Under the premise of qualitative, MKS CANable V2.0 Pro module has stronger anti-interference ability and is very suitable for industrial debugging or motor field applications. CANable analyzer is compatible with ARM-based embedded platforms such as: RaspberryPi, RaspberryPiZero, ODROID, BeagleBone, etc., ideal for integration into OEM products. Features: 1. Support CAN2.0A, CAN2.0B, baud rate up to 1M; 2. Support candleLight, slcan firmware, slcan initially supports CAN-FD, and the test rate can reach 2M/5M baud rate; 3. Compatible with socketcan through slcand; 4. The terminal resistor can be selectively enabled/disabled through the short-circuit cap; 5. Support Type-C USB interface, online firmware upgrade and DFU mode firmware upgrade; 6. Use high-performance ARM Cortex-M4 STM32G431C8T6 processor with a running frequency of up to 170MHz; Notice: CANable V2.0 version has compatibility issues when used in TSMaster; if you must use TSMaster software, please purchase CANable V1.0 version.